All About Daily Insulation News

Attic Insulation: Need to weatherproof your home? We can help!

Jun 20

A little more attention to your attic could make a huge difference. You can save money on cooling and heating expenses by installing insulation in your attic regardless of whether you are building a brand new home or renovating your old one. A poorly insulated attic could cause issues for even the most efficient HVAC units.


A lot of homeowners believe that comfort should be just as important as saving money on their energy bills. If the temperature in the room is different, it could impact the level of comfort. Insulation in your attic will ensure that the temperature of your home will not change due to its protection from the extremes of the outside conditions.


You can tackle it yourself if you are confident. If you aren't, you can hire an attic insulation Richmond expert to complete it in just a few hours. Attic insulation is a straightforward task that doesn't require massive remodeling.


What attic insulation type is the most efficient?

This step-by-step guide to making it easier for you. A basic understanding can help those who do not have the time or expertise to finish the task.


These are the topics covered in depth in this book.


What are the benefits of Attic Insulation? for?


Attic Insulation Richmond creates an air barrier between your home with the exterior. It stops the heat from venting through your roof. It shields your house from the extreme temperature, both in winter and summer. The insulation of the attic is essential since the majority of cold and hot air is able to enter through the roof.


The attic is the one that is most affected by the heat of the sun's rays directly hitting your house, especially during the afternoon. The heat emitted by the sun can be felt throughout the entire home. Insulating your attic could help you save up to 85% of heating expenses in winter.


The insulation of your cooling and heating appliances can help you save in the long run. According to the EPA attic insulation, it can reduce energy bills by 15 percent. The fluctuation in temperature can not only increase the cost of your home, but it also can make your HVAC system fail more quickly. Attic insulation is an excellent aid in extreme weather.


Insulation in the attic Richmond enhances the quality of air. Insufficient insulation could allow contaminants to enter your home and affect the quality of the air you breathe. The insulation of your attic can stop contamination from spreading through your house. Also, it prevents the accumulation of moisture and is an added benefit. The high humidity could lead to the vapor of water infiltrating your walls, causing mold to grow.


It is recommended to first think about the possibility of insulation in your attic.


The windows on the outside of the structure.

There are many elements to be considered when buying attic insulation.




The R-value is the amount of resistance per inch of thickness. This indicates how well your insulation is to heat flow. Based on the type of insulation, R3.8 is the recommended R-value for the majority of attics.


What amount of insulation is required?


These are the factors that will allow you to decide the amount of insulation you need for your attic.


  • It is possible that you will require additional insulation based on the conditions in your area to ensure that your home is secure.

  • It is necessary to install insulation to keep the temperature stable in older homes.

  • The size of your attic: How large is it? It determines how much insulation you can use. If you need advice from a professional seeks out a professional.

  • The insulation should be applied to attic Joists. Insulate if you're in a position to see the Joists. The attic insulation should be installed in a uniform manner.


Different types of insulation materials


The insulation of the attic can be accomplished using a variety of materials. Before purchasing attic insulation, it's essential to be aware of the different materials that are available.


  • Polystyrene comes in a range of R-values ranging from 3.8 to 5.8 per inch. It is mostly used to make foam board insulation.

  • For insulation made of liquid polyurethane, the R-value ranges between 3.5 to 6.25 inches. The use of open-cell insulation or closed-cell insulation can affect the R-value.

  • Cellulose, which is the primary ingredient is made of straw, cardboard newspapers, straw, and many other materials. It is an insulation substance that has been in use for a long time. Its R-value is 3.8 per inch.

  • Fiberglass insulation is simple to cut since it is composed of light and woven fibers. The blanket insulation is R-valued at 2.7 which is the norm.

  • Denim is made of denim cotton. It is safe, and simple to maintain, and set up however, it is more expensive than other alternatives. An R-value of 3 is most effective for stopping airflow.

  • Mineral wool is a type of rock wool and Slag. Slag is made of melting metal scraps. It has a 3.3 R-value. It's also fireproof.


Why is it that attic insulation is not required?


The insulation of the attic in older homes must be handled with care. There was ample room to expand between the walls of houses that were older. These spaces can become a source of mold growth when insulation isn't put in place to prevent moisture from entering.


A roof made of wood isn't able to be protected by insulation. The roofing material originally was designed to dry naturally after exposure to moisture and rain. If the insulation is not properly stuffed with moisture, it can form.


How to Select the Right Attic Insulation Types


When you are comparing attic insulation take into consideration the installation ease and the R-value in order to determine which insulation is the best one for your home.


Here are a few of the most sought-after options:


  • Insulation foam boards


Foam boards may be found with an R-value as high as 6.5 according to their thickness. They are composed of polystyrene and polyurethane. They are twice as robust as other materials of similar thickness.


Since it doesn't hold moisture A foam board is perfect for humid conditions.


  • Spray foam insulation is easy to install


Spray it on the attic's walls and cavities using the help of liquid polyurethane. It becomes hard as it cools. It's versatile and can be applied to small spaces. This is the least expensive in terms of limiting the transfer of cold or heat. Spray foam is more complicated than you imagine. If you're not sure how to utilize it, it could be worthwhile to hire a professional.


There are two kinds of spray foam insulation that are available:


  • Closed-cell cells are filled with gas, which allows the foam to expand, filling in the gaps. This type has the greatest R-value, which is 6.2/inches.

  • Since it is filled with air, this kind of cell can be soft and soft. The R-value of this cell is 3.7.

  • Spray foam insulation that is contaminated with formaldehyde and urea must be avoided to protect yourself.

America Energy Solution, LLC

13131 Lowery Bluff Way, Midlothian, Virginia, 23112

(804) 409-2303